Material Acoustics – MomertzMethod

This sound card allows the user to control all settings from WinMLS, including:

* volume controls (input and output) including analog microphone gain* phantom power

WinMLS is currently set to measure in loop-back mode (for impulse response measurements). For more information about this, go to Measurement→System Delay….

Click the Next > button to continue.

The phantom power setting is set to Left as shown in the picture. This means that left input channel is phantom powered.

If you are doing electrical measurement, the phantom power should be turned off.

To select another phantom power settings, go to Measurement→Sound Card… and select from the list box as shown in the picture.