Room Acoustics – Reverberation Time
Step 1 – Measuring Room Acoustics
Measuring room acoustic parameters such as reverberation time is a simple task with WinMLS.
IMPORTANT: For a description on how to do this, click help.
You may also find this in the paperback manual if you prefer to read from paper. If you do not have a paperback manual you may print out from the help file.
When you followed this guide, click the Next > button to continue.
Step 2 – About the Plot
The reverberation time is displayed in one-third octave bands in the upper plot (see picture). The numbers in the plot show the reverberation time.
The lower plot displays the time data (impulse response) plotted on a dB y-axis which makes it possible to see the decay as function of time (see picture).
To display the FAQ on the room acoustics part of WinMLS, click help.
After doing this, click the Next > button to continue.
Step 3 – Customize the Wizard
If you want to start the Wizard again, do this from Measurement→Wizard→Start.
You can easily edit the Wizard to include your own spesific instructions from Measurement→Wizard→Editor….
Click help for more information.
If you want WinMLS to remember changes you have made to the settings, store the setup from Setup→Store….
Click the Finish button to exit this wizard.