Sound Cards – PreSonus FireBox
Step 1 – PreSonus FireBox
Click the Next > button to continue.
Step 2 – Setting input and output level
The input and output levels are calibrated.This sound card does not support setting the input and output level from WinMLS.
You must use PreSonus' own mixer, and the knobs on the card to do this.
Step 3 – System Delay
WinMLS is currently not able to measure the correct system delay if using this sound card.
Because of this, correction for the sound card is not turned on as default (step 7 in Measurement→Settings…).
For more information about this, go to Measurement→System Delay….
Click the Next > button to continue.
Step 4 – Troubleshooting
If you have problems getting the sound card to work, first make sure that it works as a WIndows sound output device.
Then try reloading the setup.
Only 16 bits input/output currently works with WinMLS, not 24 bits.
Step 5 – Load New Setup
Now load a setup that contains the measurement settings for your application.
You may wish to store this setup before doing this if you have done any changes you want to keep. To do this, go to Setup→Store….