Sound Cards – SB – MP3+ Line Input Mic Sync
Step 1 – MP3+ Line Input
This setup contains calibrated settings if using the Creative MP3+ for electrical measurements.
Important: You must plug a phono cable between the red phono plugs. (This is for the synchronization signal that is sent in channel 2.)
Connect your input and/or output to the white phono plugs.
Click help for detailed information including pictures.
Step 2 – About this Setup
Unlike the other setups, the the setups in this "Sound Cards" category is set to load sound card settings.
Therefore, after loading the setup for your sound card, load another setup from one of the other categories that will load the settings needed for your measurement application.
If you do not find your sound card in the sound card setups, click the help button for instructions on how to set up your sound card manually.
Click help for more info.