Making a setup for your sound card

Go to Setup->Load... and see if you can find your sound card in the Sound Cards section. If you can not find your sound card in the sound card setups you should make your own sound card setup, this section explains how to do this.

Please follow the procedure in the given order.

Go to Setup->Load…, go to the Sound Cards section and select the setup named Sound Cards_Default as shown below:

Write your comment on the software in the WinMLS Wizard, to do this go to Measurement->Wizard->Editor….

To calibrate your sound card, go to the Calibrating your sound card section above and follow the procedure. First do the mixer calibration (if desired), then the level calibration.

When finished, you must save it using Setup->Store.... Make sure that you start with Sound Cards_, an example is shown below.

After storing the setup you may use Setup->Export… to export the setup if you want to make a backup of it. If you want to help us and other WinMLS user, you can e-mail it to us and we may distribute this setup to other WinMLS users. Our goal is to provide setups for as many sound cards as possible.

To test the sound card we recommend The first measurements walk-through sections 1-8. If you wish to use WinMLS to measure distance or time delay, you should go through Measurement walk-through 4-7. In this setup, use the setting that is most suitable for you.