If you are going to use WinMLS for analysis only, and not for
performing measurements, you should skip this section.
If you are using Windows XP as operative system, you can
optimize your PC for applications by
following the instructions given at this link:
It is really worthwhile to have a look at this website,
especially if you have problems getting you sound card to work properly.
First display the Load Sound Card dialog as shown below (to do this,
select Load Sound Cardů from the Setup menu).
If you find your sound card in the Matching setups
list or in the Manual setup selection list, select your sound card and
click the Load setup button. A wizard with instructions will appear,
follow the instructions in this wizard. Try to measure. If this works, you can
skip this section.
If you cannot find your sound card in the Matching
setups list or in the Manual setup selection list, select the setup
named Default from the Manual setup selection list as shown in the
See the sections below on how to select your sound card
Sound card settings for general sound cards
Calibrating your sound card
Testing your sound card