Autoname generator

The autoname generator is used to automatically assign a number to the suggested measurement filename.

The first edit box gives the start number of the auto-numbering. The second edit box gives the number where the auto-numbering ends. When this end-number is reached, the auto-numbering starts at the start number again. If you for example, are to perform 8 measurements that should have the same name, but numbered 1 to 8, you should set this to 8. Then when saving measurement number 9 the Defaults for Saving dialog box will be displayed and you may change the name.

displays the current value of the counter. E.g. after saving 5 measurements, the counter will have the value 5.