LynxTWO

Measure multi-channel with full bandwidth up to 96 kHz with WinMLS2000!

Using the Lynx2 sound card you can do this since it can measure with sampling frequencies up to 200 kHz (215 kHz is promised). And the good thing, the Lynx2C card has 6 analog inputs. All the channels have been tested (Windows 98 and Windows XP) and was found to be synchronized. Note that you need a special version of WinMLS to be able to measure with sampling frequencies above 96 kHz.

The WinMLS mixer is not supported, the Lynx mixer works in the digital domain so the levels should be kept at maximum. Use external (outside of PC) mixer is recommended to set levels if you want the best results.

24 bits sampling is supported, and works if you select 32 bits in WinMLS.

Measuring at sampling frequency 200 Hz, we found that the response was -10 dB at 100 kHz to avoid aliasing.

The time delay is always the same when used with WinMLS (according to our tests) and is given below:

Time delay for Fs < 50.5 kHz, 64 samples

Time delay for Fs >= 50.5 kHz < 101 kHz, 47 samples

Time delay for Fs >= 101 kHz , 40 samples