Tasks when performing a measurement

determines if a new measurement is to be performed in the active window or if a new window is to be opened. If Perform measurement in new group (windows) is selected, a new window will be opened when a new measurement is performed. This is similar to the two options you have when opening a measurement file. You may then choose between Insert… and Open…. Insert… will open the measurement file in the existing window, while Open… will open it in a new window

will add a delay after you start the measurement before it is actually performed. If you have to do something before each measurement and you don’t have anyone to start the measurement for you, this delay after starting the measurement may be useful.

determines if the dialog box found in View->Volume and Input Levels(s) dialog is to be displayed when a measurement is performed.

determines if the measurement should be saved automatically using the filename and other parameters from Measurement->Defaults for Saving….

determines if a new measurement is to be started after performing a successful measurement. It makes it possible to perform several measurements without user interaction.

determines if an executable file is to be run after a measurement is performed. The name of the executable must be specified in the field below the check box. This may be used for controlling a turntable of type B&K®. For information about this, run the file BKturntable.exe found in the WinMLS folder.

adds a delay after the measurement has been performed. This may be useful when several measurements are performed in automatic mode.