Total calibration
The purpose of this type of calibration is to calibrate the whole input chain in one operation without having to calibrate the sound card first. This calibration is fast and simple, but we recommend that you instead use the Detailed Calibration (see below) if you are using WinMLS both for electrical measurements and measurements where you are using a transducer (e.g. a microphone), or a pre-amplifier with changeable gain.
gives the number WinMLS uses to calibrate the input. This number will automatically be set when clicking the 
button, but it may be manually set.
performs the calibration procedure.
opens the calibration settings shown below.
displays the date of the last calibration. It is set by clicking 
.
