Is there a way of automatically sending measurement channel two to the lower plot or insert measurements in both upper and lower plot in one operation.

At the bottom part of Measurement->Measurement Tasks..., there is a check box that will do this called . If it is checked and a multi-channel measurement is performed, channel 1 will be plotted in the upper plot and channel 2 will be plotted in the lower plot. Make sure you are viewing two plots, if you only have one plot, channel two will not be displayed.

If several measurements are inserted using File->Insert in Active Group…, the first measurement will be displayed in the upper plot, the second will be displayed in the lower plot, the third will be displayed in the upper plot, and the forth in the lower, and so on… This is useful when computing the room acoustics parameters that need two measurements.

At the bottom part of Measurement->Measurement Tasks..., make sure is checked. If it is checked and a multi-channel measurement is performed, channel 1 will be plotted in the upper plot and channel 2 will be plotted in the lower plot. Make sure you are viewing two plots, if you only have one plot, channel two will not be displayed.

If several measurements are inserted using File->Insert in Active Group…, the first measurement will be displayed in the upper plot, the second will be displayed in the lower plot, the third will be displayed in the upper plot, and the forth in the lower, and so on… This is useful for computing room acoustics parameters that need two measurements. Note that you may select measurements in any order by clicking on the measurement files in the File->Insert in Active Group… dialog.